Feb 27

How to Re-calibrate laptop battery

In the last artcile we know how to calibrate laptop battery. Now let me introduce some tips about re-calibrate laptop battery.

It is difficult to predict how long a laptop battery charge will last because each computer user has different habits and needs. The rate at which you use laptop battery power will determine how long you can use the battery of your laptop. You can re-calibrate your laptop battery if the battery’s life has gotten shorter over time. Your laptop battery might need a good calibration if it doesn’t seem to be getting the mileage that it should. How to re-calibrate laptop battery? The following paragraphs will give you the answer.

First put the laptop computer to sleep by turning off the screensaver and other power management settings of the computer. Then fully charge the computer and allow it to run all the way down until the computer shuts off automatically. Once the laptop battery has fully drained, charge it back up again and restore the screensaver and power management settings.

Re-calibrate your battery every month or so by fully charging, fully discharging, and then fully charging again. Basically to have a chance to re-calibrate your laptop battery is to turn off all power-saving features completely and then fully recharge them. If it doesn’t work for the first time then try two more full discharges and recharges.

The above way of re-calibrating the laptop batteries works well with laptops using Ni-MH cells. But not with laptops using Li-Ion batteries because deep discharges will actually decrease the charge capacity and lifespan of Li-Ion cells. Moreover Li-ion batteries irreversibly lose approximately 20% capacity per year from the time of manufacture at a typical 100% charge level at 25deg.C, even when unused. Li-ion batteries irreversibly lose approximately 2%, 4%, 15% at 0deg.C, 25deg.C and 40deg.C respectively, when stored at 40% charge level. That is every deep discharge cycle decreases the capacity of the Li-ion batteries. As the Li-Ion batteries are chemical in nature, charging and recharging is not going to fix the problem once the chemical reactions stop happening. Therefore the best advice for re-calibrating the Li-Ion batteries is to store the battery at 40% charge if it kept unused for any unlimited period of time. Also don’t leave the battery in the laptop if you don’t use the battery or if you plug the laptop into outlet power.

You can also re-calibrate your laptop battery using Thinkpad T61 Battery Maximizer in order to maximize your laptop battery’s life. If your laptop has IBM ThinkPad Battery MaxiMiser and Power Management features installed, you can verify the condition of the laptop battery. You can check the status of your battery using the Battery MaxiMiser Gauge in the taskbar tray. The ThinkPad’s Lithium Ion battery pack that seems to be an intelligent battery uses a microprocessor to monitor its capacity. Then the microprocessor of the battery pack passes the information about the remaining battery capacity to the laptop. The laptop indicates the capacity with high accuracy.

Using the Dell inspiron 6400 Laptop Battery Learning Utility, a modified version of a Win98 boot floppy, can also help you. Just place it in the floppy drive, and then turn on the computer. The re-calibration process is automated and takes about six hours to finish. This utility is available in different versions for different models. You can run the utility every two months.

If the laptop battery is still bad then it must have developed a memory that cannot be erased easily. If calibration doesn’t help, then it is the right time to purchase another battery.

Jan 12

How to Calibrate laptop battery

After using for months, the battery get weak and cant fully discharge. Also in this situation the laptop battery’s 76% even less in work.Now we need to Calibrate laptop battery. I found a note about recondition laptop battery from HP manufacturer’s handbook. Surprisingly, it offered some really helpful laptop battery calibration and maintenance tips, which I’d like to share with you:

Calibrating a Battery Pack

When to Calibrate laptop battery

Even if a battery pack is heavily used, it should not be necessary to calibrate it more than once a month. It is not necessary to calibrate a new laptop battery pack before first use. However, make sure that the battery pack is fully charged, especially if it is the only power source.

Calibrate laptop battery pack under the following conditions:

? When the battery status display seems inaccurate.

? When you observe a significant change in normal batteryrun time.

? When the battery pack has not been used for one monthor more.

How to Calibrate laptop battery

To Calibrate laptop battery pack, you must fully charge, fullydischarge, and then fully recharge the battery pack.

Charging the Battery Pack

Fully charge the battery pack when the notebook is in use. To charge the battery pack:

1. Insert the battery pack into the notebook.

2. Connect the notebook to external power through an AC adapter. (The battery light turns on.)

The battery light turns off when the Macbook Pro 13″ battery pack is fully charged.

Discharging the Battery Pack

Disabling Hibernation

To fully discharge the battery pack, disable Hibernation temporarily.

To disable Hibernation:

? Select the Power Meter icon on the taskbar or access Power Options > Hibernate, and clear the Enable Hibernate support check box.

Discharging the inspiron 1501 Battery Pack

After the battery light turns off, which indicates that the battery pack is fully charged, begin discharging the battery pack.

    To fully discharge the battery pack:

  1. Select the Power Meter icon on the taskbar, or select Start > Control Panel > Performance and Maintenance > Power Options > Power Schemes.
  2. Write down the 3 settings in the Plugged In column and the
  3. settings in the Running on Batteries column, so you can reset them after calibration.
  4. Select the drop-down lists and set all 6 options in both columns to Never.
  5. Select the OK button.
  6. Disconnect the notebook from the external power source, but do not turn off the notebook.
  7. Run the notebook on battery power until the battery pack is fully discharged. The battery light begins to blink when the battery pack has discharged to a low-battery condition. When the battery pack is fully discharged, the power/Standby light turns off and the notebook shuts down.
    Recharging the inspiron 6000 Battery Pack

  1. Connect the notebook to external power and keep the notebook connected until the battery pack is fully recharged and the battery light turns off.
  2. ?You can use the notebook while the battery pack is recharging, but the battery pack will charge faster if the notebook is turned off.

  3. Select the Power Meter icon on the taskbar or select Start > Control Panel > Performance and Maintenance > PowerOptions > Power Schemes.
  4. Reenter the 3 settings you wrote down for the 3 options in the Plugged In column and for the 3 options in the Running on Batteries column.
  5. Select the OK button.

Now you already Calibrate laptop battery

The article is from : http://www.eastwoodzhao.com/maintaining-and-calibrating-a-laptop-battery-pack/